deekshith.in

Wednesday, April 25, 2012

Automatic Water Level Controller With Error Indicator Alarm

Labels: ,
Block Diagram Of Automatic Water Level Controller With Error Indicator
Block Diagram
Automatic Water Level Controller With Error Indicator Alarm is an electronics project which I have done recently. Here is the brief description / abstract of it. The Water Level Controller with Error Indicator employs a simple mechanism to detect and maintain the water level in a tank or any other container by switches on/off the motor automatically when needed. The level sensing is done by a set of nine probes which are placed at nine different levels on the tank walls (with probe9 to probe1 placed in increasing order of height, common probe (i.e. a supply carrying probe) is placed at the base of the tank). Basically, level9 represents the “tank full” condition while level 1 represents the “tank empty” condition.
When the water-level is below the minimum detectable level (MDL), it is detected by the micro-controller and turns ON the water motor until the tank is full and then switches it OFF.

The water level controller described here not only switches the motor, but it also ensures that the water is falling in the tank after the motor is turned ON. If the water is not falling into the tank even after turning ON the motor, it switches ON an error alarm. This error can occur when there is no water underground or when the motor is not working properly. This circuit alerts us when this error occurs.

Here is the recorded video of the prototype of Automatic Water Level  Controller With Error Indicator:





You can do this project as a hobby or if you want to install at your home as I have done. You can also do this as a part of school / College project, especially suitable as a mini-project for engineering students.



I encourage you to do this project on your own.
However,For the complete details of this project including the circuit schematic and source-code, you can contact me:


10 comments:

  1. AnonymousAugust 14, 2012 at 10:24 AM

    Hello sir, I'd like to do this for my Electronics project. I am a 4th year Mechanical Engineering Student and it is required for us to make an Electronic Project. Can you please help me? YOu can e-mail me at monster_egg123@yahoo.com. Thank you sir

    ReplyDelete
  2. UnknownJune 7, 2013 at 4:40 AM

    i would like to this as my final year project. my e-mail address s20639956@nmmu.ac.za

    ReplyDelete
  3. AnonymousJuly 16, 2013 at 6:36 AM

    Sir i hv tried lot of time bt im nt getting the result pls help me to do ths project sir
    sudhakarsingh40@rocketmail.com

    ReplyDelete
  4. PournimaSeptember 5, 2013 at 6:50 AM

    SIR I WOULD LIKE TO DO THIS PROJECT AS PPT PIS SEND CKT. DIAGRAM URGENTALLY AT swamipournima@gmail.com

    ReplyDelete
  5. PournimaSeptember 5, 2013 at 6:53 AM

    sir i would like to do this project as ppt.pls send me ckt. diagram uragentally at swamipournima@gmail.com

    ReplyDelete
  6. AnonymousSeptember 29, 2013 at 9:02 AM

    i want to install in my home please all details send me in my email please help me. dipankarskyfax10@gmail.com

    ReplyDelete
  7. AnonymousOctober 17, 2013 at 10:12 AM

    Nice one dude, can you share the details please? my email ID open.drupal@gmail.com

    ReplyDelete
  8. AnonymousOctober 20, 2013 at 10:10 PM

    hello can you send me the details of the project at sarojtm25@gmail.com .would be glad if you did.Cheers

    ReplyDelete
  9. UnknownFebruary 5, 2014 at 6:52 PM

    sir am interested is make such type of project so if you can send me the code in circuit with descrbtion please at khalidelyaas@gmail.com

    ReplyDelete
  10. UnknownJanuary 13, 2015 at 1:20 AM

    This comment has been removed by the author.

    ReplyDelete

Subscribe to: Post Comments (Atom)